Visit: The New Homepage

Visit: The New Homepage
Kindly click the image for the updated Notes Online

Tuesday, February 5, 2013

Wireless LANs - MCQs

Posted by Unknown at 11:11 AM
Hits:
Multiple choice questions in Wireless LANs
In this particular topic you have learned Wireless LANs, the newest evolution in LAN technology. This chapter discuss the two promising wireless technologies for LANs: IEEE 802.11 wireless LANs, sometimes called wireless Ethernet, and Bluetooth, a technology for small wireless LANs. If you skip the summary visit Wireless LANs .

Begin and Good luck!
  1. The original IEEE 802.11, has a data rate of _____Mbps.
    • A)   11
    • B)   22
    • C)   6
    • D)   1
  2. In IEEE 802.11, when a frame is going from a station to an AP, the address flag is _____.
    • A)   01
    • B)   10
    • C)   11
    • D)   00
  3. In IEEE 802.11, when a frame is going from one station in a BSS to another without passing through the distribution system, the address flag is _____.
    • A)   11
    • B)   00
    • C)   10
    • D)   01
  4. In IEEE 802.11, the access method used in the PCF sublayer is ______.
    • A)   polling
    • B)   controlled
    • C)   contention
    • D)   none of the above
  5. In IEEE 802.11, a BSS without an AP is called an _________.
    • A)   an infrastructure network
    • B)   an ad hoc architecture
    • C)   either (a) or (b)
    • D)   neither (a) nor (b)
  6. In IEEE 802.11, the addressing mechanism can include up to ______addresses.
    • A)   six
    • B)   five
    • C)   four
    • D)   none of the above
  7. In Bluetooth, the _______ layer is roughly equivalent to the physical layer of the Internet model.
    • A)   baseband
    • B)   radio
    • C)   L2CAP
    • D)   none of the above
  8. In IEEE 802.11, a station with ________ mobility is either stationary (not moving) or moving only inside a BSS.
    • A)   ESS-transition
    • B)   no-transition
    • C)   BSS-transition
    • D)   none of the above
  9. In Bluetooth, the L2CAP sublayer, is roughly equivalent to the LLC sublayer in LANs.
    • A)   baseband
    • B)   L2CAP
    • C)   radio
    • D)   none of the above
  10. In IEEE 802.11, when a frame is going from one AP to another AP in a wireless distribution system, the address flag is _____.
    • A)   10
    • B)   01
    • C)   11
    • D)   00
  11. A Bluetooth network is called a ________.
    • A)   scatternet
    • B)   bluenet
    • C)   piconet
    • D)   none of the above
  12. A Bluetooth network consists of _____ primary device(s) and up to ____ secondary devices.
    • A)   one; seven
    • B)   one; five
    • C)   five; three
    • D)   two; six
  13. In Bluetooth, the current data rate is ____Mbps.
    • A)   11
    • B)   5
    • C)   2
    • D)   none of the above
  14. In IEEE 802.11, a BSS with an AP is sometimes referred to as ____________.
    • A)   an infrastructure network
    • B)   an ad hoc architecture
    • C)   either (a) or (b)
    • D)   neither (a) nor (b)
  15. In IEEE 802.11, the ______ is a timer used for collision avoidance.
    • A)   BSS
    • B)   ESS
    • C)   NAV
    • D)   none of the above
  16. In IEEE 802.11, the MAC layer frame has ______ fields.
    • A)   four
    • B)   six
    • C)   five
    • D)   none of the above
  17. Bluetooth uses ______method in the physical layer to avoid interference from other devices or other networks.
    • A)   FHSS
    • B)   DSSS
    • C)   FDMA
    • D)   none of the above
  18. In Bluetooth, the _____ link is used when data integrity is more important than avoiding latency.
    • A)   SCL
    • B)   ACO
    • C)   ACL
    • D)   SCO
  19. In Bluetooth, the _____layer is roughly equivalent to the MAC sublayer in LANs.
    • A)   L2CAP
    • B)   radio
    • C)   baseband
    • D)   none of the above
  20. IEEE has defined the specifications for a wireless LAN, called _______, which covers the physical and data link layers.
    • A)   IEEE 802.5
    • B)   IEEE 802.11
    • C)   IEEE 802.2
    • D)   IEEE 802.3
  21. In IEEE 802.11, a station with ________ mobility can move from one ESS to another.
    • A)   BSS-transition
    • B)   ESS-transition
    • C)   no-transition
    • D)   none of the above
  22. The IEEE 802.11g, uses _________.
    • A)   DSSS
    • B)   OFDM
    • C)   FHSS
    • D)   either (a) or (c)
  23. In IEEE 802.11, the access method used in the DCF sublayer is _________.
    • A)   CSMA/CA
    • B)   CSMA/CD
    • C)   ALOHA
    • D)   none of the above
  24. The RTS and CTS frames in CSMA/CA ____ solve the hidden station problem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem.
    • A)   cannot; cannot
    • B)   can; cannot
    • C)   cannot; can
    • D)   can; can
  25. In IEEE 802.11, communication between two stations in two different BSSs usually occurs via two ________.
    • A)   ESSs
    • B)   APs
    • C)   BSSs
    • D)   none of the above
  26. Bluetooth is a _______ technology that connects devices (called gadgets) in a small area.
    • A)   VLAN
    • B)   wired LAN
    • C)   wireless LAN
    • D)   none of the above
  27. The original IEEE 802.11, uses _________.
    • A)   FHSS
    • B)   OFDM
    • C)   DSSS
    • D)   either (a) or (c)
  28. The IEEE 802.11a, uses _________.
    • A)   DSSS
    • B)   OFDM
    • C)   FHSS
    • D)   either (a) or (c)
  29. In IEEE 802.11, a ___ is made of stationary or mobile wireless stations and an optional central base station, known as the access point (AP).
    • A)   BSS
    • B)   CSS
    • C)   ESS
    • D)   none of the above
  30. The IEEE 802.11 standard for wireless LANs defines two services: ______ and _______.
    • A)   ESS; SSS
    • B)   BSS; ESS
    • C)   BSS; ASS
    • D)   BSS; DCF
  31. In Bluetooth, the _____ link is used when avoiding latency (delay in data delivery) is more important than integrity (error-free delivery).
    • A)   SCL
    • B)   ACL
    • C)   ACO
    • D)   SCO
  32. IEEE 802.11b, has a data rate of _____Mbps.
    • A)   5.5
    • B)   2
    • C)   1
    • D)   none of the above
  33. IEEE 802.11g, has a data rate of _____Mbps.
    • A)   22
    • B)   11
    • C)   2
    • D)   1
  34. In IEEE 802.11, a station with ________mobility can move from one BSS to another, but the movement is confined inside one ESS.
    • A)   ESS-transition
    • B)   no-transition
    • C)   BSS-transition
    • D)   none of the above
  35. The access method in Bluetooth is ________.
    • A)   TDD-TDMA
    • B)   CDMA
    • C)   FDMA
    • D)   none of the above
  36. The IEEE 802.11 wireless LANs use ________ types of frames.
    • A)   five
    • B)   six
    • C)   four
    • D)   none of the above
  37. In IEEE 802.11, _______ is an optional access method that can be implemented in an infrastructure network (not in an ad hoc network).
    • A)   PCF
    • B)   DCF
    • C)   either (a) or (b)
    • D)   neither (a) nor (b)
  38. In IEEE 802.11, when a frame is coming from an AP and going to a station, the address flag is _______.
    • A)   00
    • B)   11
    • C)   10
    • D)   01
  39. In Bluetooth, multiple ________ form a network called a _________.
    • A)   piconets: bluenet
    • B)   scatternet; piconets
    • C)   piconets: scatternet
    • D)   bluenet; scatternet
  40. The IEEE 802.11b, uses _________.
    • A)   OFDM
    • B)   FHSS
    • C)   DSSS
    • D)   either (a) or (b)
  41. IEEE 802.11a, has a data rate of _____Mbps.
    • A)   6
    • B)   2
    • C)   1
    • D)   none of the above

Back to Homepage

Note: Check your works. Wireless LANs - MCQs Answers

credit: Behrouz A. Forouzan©2013 www.FroydWess.com
Share Note :
Welcome to Online-Notes

0 comments: Post Yours! Read Comment Policy ▼
PLEASE NOTE:
I have Zero Tolerance to Spam. It will be deleted immediately upon review.

Post a Comment

 

© 2013 - 2014. All Rights Reserved | Online Notes and Lectures | Customized by MovieOnMovie

Home | | | Top