Virtual-Circuit Networks: Frame Relay and ATM

Definition of Terms

• Virtual-circuit switching is a data link layer technology in which links are shared.
• A virtual-circuit identifier (VCI) identifies a frame between two switches.
• The three phases in virtual circuit switching are setup, data transfer, and teardown. 
• The setup phase can use the permanent virtual circuit (PVC) approach or the switched virtual circuit (SVC) approach.
• Frame Relay is a relatively high-speed, cost-effective technology that can handle bursty data.
• Frame Relay is a virtual-circuit wide-area network that was designed in response to demands for a new type of WAN in the late 1980s and early 1990s.
• Frame Relay operates only at the physical and data link layers.
• Frame Relay does not provide flow or error control; they must be provided by the upper-layer protocols.
• To handle frames arriving from other protocols, Frame Relay uses a device called a
  Frame Relay assembler/disassembler (FRAD).  A FRAD assembles and disassembles
  frames coming from other protocols to allow them to be carried by Frame Relay frames.
• Frame Relay networks offer an option called Voice Over Frame Relay (VOFR) that
  sends voice through the network.
• Local Management Information (LMI) is a protocol added recently to the Frame Relay protocol to provide more management features.
• One of the nice features of Frame Relay is that it provides congestion control and quality of service (QoS).
• Both PVC and SVC connections are used in Frame Relay.
• The data link connection identifier (DLCI) identifies a virtual circuit in Frame Relay.
• VCIs in Frame Relay are called DLCIs.
• Asynchronous Transfer Mode (ATM) is a cell relay protocol that, in combination with SONET, allows high-speed connections.
• A cell is a small, fixed-size block of information.
• The ATM data packet is a cell composed of 53 bytes (5 bytes of header and 48 bytes of payload).
• Note that a virtual connection is defined by a pair of numbers: the VPI and the VCI.
• ATM eliminates the varying delay times associated with different-size packets.
• ATM can handle real-time transmission.
• A user-to-network interface (UNI) is the interface between a user and an ATM switch.
• A network-to-network interface (NNI) is the interface between two ATM switches.
• In ATM, connection between two endpoints is accomplished through transmission paths (TPs), virtual paths (VPs), and virtual circuits (VCs).
• In ATM, a combination of a virtual path identifier (VPI) and a virtual-circuit identifier identifies a virtual connection.
• ATM technology can be adopted for use in a LAN (ATM LAN).
• In a pure ATM LAN, an ATM switch connects stations.
• In a legacy ATM LAN, the backbone that connects traditional LANs uses ATM technology.
• A mixed architecture ATM LAN combines features of a pure ATM LAN and a legacy ATM LAN.
• Local-area network emulation (LANE) is a client/server model that allows the use of ATM technology in LANs.
• LANE software includes LAN emulation client (LECS), LAN emulation configuration server (LECS), LAN emulation server (LES), and broadcast/unknown server (BUS) modules.

The ATM standard defines three layers:

• a.   Application adaptation layer (AAL) accepts transmissions from upper-layer services and maps them into ATM cells. The AAL is divided into two sublayers: convergence sublayer (CS) and segmentation and reassembly (SAR).
• b.  ATM layer provides routing, traffic management, switching, and multiplexing services.
• c.  Physical layer defines the transmission medium, bit transmission, encoding, and electrical-to-optical transformation.

There are four different AALs, each for a specific data type:

• a.  AAL1 for constant-bit-rate stream
• b.  AAL2 for short packets.
• c.  AAL3/4 for conventional packet switching (virtual-circuit approach or datagram approach).
• d.  AAL5 for packets requiring no sequencing and no error control mechanism.

Frame Relay network

Three address formats

Virtual connection identifiers in UNIs and NNIs

An ATM cell

ATM layers

ATM LANs

Note: You can proceed to take the multiple choice exam regarding this topic. Virtual-Circuit Networks: Frame Relay and ATM - Set 1 MCQs

---

credit: Behrouz A. Forouzan©2013 www.FroydWess.com

Share Note :